E

Recessed ceiling light - Dione, 8.5 W, DIM, 4,000 K, white

565358 4042943171436
59.95 EUR (VAT included)
per 1

Sales data

Minimum order quantity 1
Order step 1

Description

  • Flat installation depth
  • Incl. dimmable power supply unit and connection box
  • Feed-through wiring possible
  • Ideal refurbishment solution
  • Light and power supply unit with adapter plug

DIONE series recessed ceiling spotlights boast a particularly low installation depth. This makes them highly space-saving and means a ceiling cavity of just 25 mm is sufficient. The connection box included in the scope of delivery and the dimmable power supply also fit snugly in the 68 mm cut-out thanks to the compact design. As all components to operate the Dione are pre-assembled, installation is time-saving and no tools are required. The connection box with push terminals additionally enables 3-pole feed-through wiring. This makes the DIONE recessed spotlight the ideal solution for retrofit installation in renovated properties or for new installations where installation space is in short supply.

With high-quality COB technology, the recessed spotlights can emit up to 750 lm at an output of 8.5 W. The housing consists of aluminium, the light emission angle is 36° and the spotlights are available in the light colours 3,000 K and 4,000 K. The light head can be swivelled by up to 30°.


Spot installation depth results from the required ceiling cavity (min. 25 mm) for swinging in the power supply.

  • Installation depth of fixed spotlight: 31 mm
  • Installation depth of swivelled spotlight: 38 mm
  • Ceiling thickness: Max. 13 mm
  • space required laterally for spring clamps: Min. 30 mm, space required laterally for power supply and connection box: Approx. 150 mm
  • Power supply dimensions: 66x35x20 mm
  • Connection box dimensions: 75x39x23 mm
  • Length of cables between connection box/power supply/spot: approx. 200 mm each

Connection box is supplied with two screws of different lengths, short screw when using thin cables, long screw when using NYM 3x1.5 installation cables etc.

Features

RRP incl. VAT 59.95 EUR
Housing Material Aluminium
Housing Color White
Frequency 50 / 60 Hz
Light Source Light source not changeable
Light Source LED
Luminous Efficiency 94.1 lm/W
Light Distribution Symmetric
Colour Consistency 5 SDCM
Switching Cycles 25000
Swivel Angle 30 Degree
Toolless Assembly Yes
Product weight 163 g
Connection Type Clamp
Primary Connection Connection box IP20
Power Supply Unit incl. Yes
Power Consumption 9 kWh/1000h
Inrush Current max. 5 A / 100 µs
Capacitive Load 1000 nF
Power Factor 0.90
Number of Circuit Breaker B10A max. 90
Number of Circuit Breaker B16A max. 145
Number of Circuit Breaker C10A max. 100
Number of Circuit Breaker C16A max. 160
Working Temperature -20 to 40 °C
Storage Temperature -20 to 40 °C
Mounting Type Installation mounting
Mounting Location Inside
Mounting Area Ceiling installation
Rated Input Voltage 220-240 V/AC
Rated Input 8.5 W
Control Trailing-edge dimmer
Control Leading-edge dimmer
Dimmable Yes
Motion Detector No
Number of Cable Entries 2
Through Wiring possible Yes
Power Supply Unit Changeable Yes by technician
Protection Class Protection class II/protective insulation
Lightcolor Neutral white
Color Temperature 4000 K
Colour Rendering Index (Ra) 84
Rated Luminous Flux 800 lm
Light direction Below
Rated Angle of Reflection 36 Degree
Turning and Swiveling Range Swiveling
Height 41 mm
Diameter 82 mm
Cut Out Diameter 68 mm
Required Installation Depth 25 mm
Installation Depth 38 mm
Mounting Surface Thickness 9-13 mm
IP Protection Class IP 20
Life Time L70 / B50 50000 h
Energy efficiency class E

Annexes

File (565358_manual.pdf, 1.07 MB)

File (565358_datasheet.pdf, 318.97 KB)

File (L565358_EDS.pdf, 513.22 KB)

File (565358_LDT.ldt, 862 Bytes)

Supplementary accessories

New
New

Operating and mounting accessories

Accessory - Safety spacer
829063

Last viewed

E